Sewage backup into your basement is a health risk and an expensive clean up. Chicagoland can stop this from happening by installing an overhead sewer.

With an overhead sewer: the house waste water from above grade (usually from first floor and above) drains to the city or village sewer main by gravity, and all waste water from below grade (usually all the basement plumbing fixtures) drain into a basin in the basement from which it is discharged into the gravity overhead sewer line by a pump.

In addition, in Chicago the basement pump basin can collect some ground water from around the house, which is then pumped into the gravity overhead sewer line as well. In the suburbs the clean ground water must be collected by a separate pit and pump and the water must discharge onto the exterior lawn or into a storm sewer.This plumbing design changes the house’s original drainage system. The original lowest drain (usually the basement floor drain) is raised to a higher level (usually first floor bathtub drain).

97ff77_eb723eee7d674838832c2fb8780c15cf

Outside, the original house sewer line’s connection to the city or village sewer main is closed off, and a sewer clean-out is installed for rodding purposes. This keeps the basement dry from municipal sewer backup. Technically, the overhead sewer system is believed to be the most reliable flood control system out of the three types of flood control systems.